← Back to Projects

Modular Fin-Alignment Tooling

Precision Tooling & Metrology

SOLIDWORKS Machining CAM
Project Hero

Objective

Achieve a fin cant angle of 1.6° ± 0.1° while remaining modular to accommodate different vehicle diameters and fin designs[cite: 3]. Designed the modular fixture and aided in CAM programming and machining the hardware[cite: 3].

<0.1° Error on all four fins, verified by independent metrology[cite: 3].

From fixed concepts to modular towers

Early concepts used a single tower or fixed geometry. Iterated to four modular towers, one constraining each fin, to accommodate different rocket diameters and fin profiles[cite: 3]. Laser-cut slots match the fin profiles and establish the 1.6° cant[cite: 3].

Tower CAD showing modular components
Tower CAD showing the modular fixture components[cite: 4].

Manufacture and assembly

Aided in CAM Programming and machining all hardware prior to final assembly[cite: 4].

Independent verification

Before the fixture was introduced, the fin inspection report recorded failures in both angular alignment and stagger criteria[cite: 5]. After using the alignment fixture, the team reported no dimensional failures[cite: 5].

Control Nominal Measured Tolerance Deviation Status
Z/X Angle Line 1 90.0000 90.1457 ±1.0000 0.1457 Pass
Z/X Angle Line 2 180.0000 178.9588 ±1.0000 1.0412 Fail
Z/X Angle Line 3 -90.0000 -89.4248 ±1.0000 0.5752 Pass